1.800.732.0144
SPORTDOG.COM
30
31
SE
TTI
NG
S
SE
TTI
NG
S
CHANGE MY DOGS SETTINGS
The MY DOGS screen allows you to add or remove dogs assigned to the Handheld Device. It helps track which dog
is wearing which collar and defines collar settings specific to that dog.
TO ADD A DOG
1. From the main menu, select
SETTINGS > MY DOGS > ADD A DOG. A screen labeled DOG
n
appears where n is
the next available number of the dog.
2. Change the dog’s name by selecting
CHANGE NAME. A text entry screen displays. Press the arrow keys to select
Clr
and press the bottom right button to clear the name. Pressing the arrow keys select letters to enter a new
name. Select
9:40 AM
GENERAL
Time
Brightness
Battery Gauge
Up / Down Indicators
More / Select
Back
Text Enter
100 YDS
TRACKING
GPS Lock/Fix Indicator
Compass
Dog Direction Indicator
Dog Direction Indicator Communication Lost
Dog On Point / Treed
Scale Indicator
Battery Gauge on Collar
C
V
T
TRAINING
Continuous Stimulation
Vibration
Tone
My Dog
R
M
P1
P2
Rising Stim
Momentary Stim
Programmable 1
Programmable 2
to complete the new name.
3. Assign a collar to this dog by selecting
COLLAR. Use the arrow keys to select the color matching the desired
collar.
4. Once a collar is assigned to the new dog, you are ready to track/train this dog. Press
BACK to return to the
main menu.
TO CHANGE A DOG’S NAME
1. From the main menu, select
SETTINGS > MY DOGS >
dog
> CHANGE NAME where dog is the name previously
entered for this dog. A text entry screen displays.
2. Press the arrow keys to select
Clr
and press the bottom right button to clear the name.
3. Press the arrow keys on the Menu Navigation Pad to enter a new name, if desired.
4. When finished, select
9:40 AM
GENERAL
Time
Brightness
Battery Gauge
Up / Down Indicators
More / Select
Back
Text Enter
100 YDS
TRACKING
GPS Lock/Fix Indicator
Compass
Dog Direction Indicator
Dog Direction Indicator Communication Lost
Dog On Point / Treed
Scale Indicator
Battery Gauge on Collar
C
V
T
TRAINING
Continuous Stimulation
Vibration
Tone
My Dog
R
M
P1
P2
Rising Stim
Momentary Stim
Programmable 1
Programmable 2
using the bottom right button.
TO ENABLE OR DISABLE E-COLLAR MODULE
The E-COLLAR setting allows you to enable (or disable) the E-Collar Module to deliver static stimulation,
vibration, or a tone for correcting/cueing this particular dog.
1. From the main menu, select
SETTINGS > MY DOGS >
dog
where dog is the name of the dog.
2. Select
E-COLLAR and use the right arrow key to select Y to enable, or N to disable stimulations for this dog.
NOTE: This setting only applies to the dog when wearing this collar.
3. When finished, press
BACK to return to the main menu.
TO CHANGE STIM BUTTONS SETTINGS FOR A DOG
The STIM BUTTONS setting allows you to assign the type of stimulation for each STIM button according to your
training preferences for this particular dog. The buttons are labeled Button 1 (top), Button 2 (middle), and Button
3 (bottom).
NOTE: This setting only applies to this specific dog.
1. From the main menu, select
SETTINGS > MY DOGS >
dog
where dog is the name of the dog.
2. Select
STIM BUTTONS. The STIM BUTTONS screen displays.
3. Press the up or down arrow to select
BUTTON 1. Press the right arrow to select C (continuous), T (tone),
V (vibration), M (momentary), R (rising), P1 (programmable 1), or P2 (programmable 2). Default for
Button 1 is C.
4. Press the up or down arrow to select
BUTTON 2. Press the right arrow to select C (continuous), T (tone),
V (vibration), M (momentary), R (rising), P1 (programmable 1), or P2 (programmable 2). Default for
Button 2 is T.
5. Press the up or down arrow to select
BUTTON 3. Press the right arrow to select C (continuous), T (tone),
V (vibration), M (momentary), R (rising), P1 (programmable 1), or P2 (programmable 2). Default for
Button 3 is V.
6. When finished, press
BACK to return to the main menu.
TO SET PROGRAMMABLE STIM LEVEL FOR A DOG
NOTE: This setting only applies to this specific dog.
1. From the main menu, select
SETTINGS > MY DOGS >
dog
where dog is the name of the dog.
2. Select
STIM BUTTONS. The STIM BUTTONS screen displays.
3. Select
P1 LEVEL and use the arrow keys to set the desired static stimulation level.
4. Select
P2 LEVEL and use the arrow keys to set the desired static stimulation level.
5. When finished, press
BACK to return to the main menu.
TO CHANGE STIM RANGE SETTINGS FOR A DOG
The STIM RANGE setting allows you to set the static stimulation range (low, medium or high) for a temperament
of a specific dog. A dog with a mild temperament should have a low range while a stubborn dog may require a high
range of static stimulation. There are multiple levels available within each stimulation range (see TO SET STIM
LEVELS on page 26). The default range setting is medium.
1. From the main menu, select
SETTINGS > MY DOGS >
dog
where dog is the name of the dog.
2. Select
STIM RANGE.
3. Press the right arrow to select
L (low), M (medium), or H (high) stimulation range.
4. When finished, press
BACK to return to the main menu.
TO CHANGE THE COLLAR ASSIGNED TO A DOG
The COLLAR setting allows you to assign a collar to a specific dog according to the color set in the MY COLLARS
screen. The color will also be used to identify the dog on the TRACKING/TRAINING screen.
1. From the main menu, select
SETTINGS > MY DOGS >
dog
where dog is the name of the dog.
2. Select
COLLAR.
3. Press the arrow keys to select the color for the desired collar then press the right arrow key. You must
select
YES to confirm the new collar assignment. NOTE: If the selected collar has already been assigned to a
different dog, a warning message displays.
4. When finished, press
BACK to return to the main menu.
TO DELETE A DOG
NOTE: Deleting a dog cannot be undone. All configuration settings related to this dog will be deleted.
1. From the main menu, select
SETTINGS > MY DOGS >
dog
where dog is the name of the dog to be deleted from
the system.
2. Press the arrow keys to select
DELETE and press the right arrow key.
3. A warning message displays. Select
YES, if desired, to confirm.
CHANGE UNIT SETTINGS
The UNITS screen allows you to change distance units and time modes.
TO CHANGE DISTANCE UNITS
1. From the main menu, select
SETTINGS > UNITS > DISTANCE.
2. Press the right arrow on the Menu Navigation Pad to select
YARDS or METERS. Distances will be displayed in
the selected format. The default is YARDS.
3. Press
BACK to return to the main menu.
TO CHANGE TIME MODE
1. From the main menu, select
SETTINGS > UNITS > TIME.
2. Press the right arrow on the Menu Navigation Pad to select
12H or 24H mode. All times will display in the
selected format. The default is 12H.
3. Press
BACK to return to the main menu.
