1.800.732.0144
SPORTDOG.COM
24
25
CO
M
PA
SS / W
AY
PO
IN
TS
CO
M
PA
SS / W
AY
PO
IN
TS
NAVIGATE WITH THE COMPASS AND GPS TOOLS
The TEK Series 1.5 GPS Tracking / GPS Tr E-Collar System comes with a built-in electronic compass and
GPS tools to track your location and guide you to previously saved locations.
SET YOUR STARTING LOCATION
The SET START POINT screen allows you to define a way point specific to your starting location prior to working
the dogs in a particular area.
TO SET A START POINT
NOTE: You must have a good GPS lock before you can mark a new way point.
1. From the main menu, select
SET START POINT. A prompt appears, “You are about to change the starting
location. Are you sure you want to continue?”
2. Select
YES to set a new starting location.
MARK YOUR LOCATION WITH WAY POINTS
The WAY POINTS screen allows you to save your current GPS location as a way point, navigate to, rename, or
delete existing way points. You can store up to 20 way points. If you have set a start point, it appears as an
X on the
tracking display. Other way points are shown by their respective number.
TO MARK A NEW WAY POINT
NOTE: You must have a good GPS lock before you can mark a new way point.
1. From the main menu, select
WAY POINTS > MARK NEW POINT. A text entry field appears.
2. Use the arrow keys to enter a name for the new way point.
3. Select
9:40 AM
GENERAL
Time
Brightness
Battery Gauge
Up / Down Indicators
More / Select
Back
Text Enter
100 YDS
TRACKING
GPS Lock/Fix Indicator
Compass
Dog Direction Indicator
Dog Direction Indicator Communication Lost
Dog On Point / Treed
Scale Indicator
Battery Gauge on Collar
C
V
T
TRAINING
Continuous Stimulation
Vibration
Tone
My Dog
R
M
P1
P2
Rising Stim
Momentary Stim
Programmable 1
Programmable 2
when finished.
TO RENAME A WAY POINT
1. From the main menu, select
WAY POINTS
> way point name
where way point name is a previously marked
way point.
2. Select
RENAME. A text entry screen displays.
3. Use the arrow keys to type in the new name.
4. Select
9:40 AM
GENERAL
Time
Brightness
Battery Gauge
Up / Down Indicators
More / Select
Back
Text Enter
100 YDS
TRACKING
GPS Lock/Fix Indicator
Compass
Dog Direction Indicator
Dog Direction Indicator Communication Lost
Dog On Point / Treed
Scale Indicator
Battery Gauge on Collar
C
V
T
TRAINING
Continuous Stimulation
Vibration
Tone
My Dog
R
M
P1
P2
Rising Stim
Momentary Stim
Programmable 1
Programmable 2
when finished.
TO DELETE A WAY POINT
NOTE: Deleting a way point cannot be undone.
1. From the main menu, select
WAY POINTS
> way point name
where way point name is a previously marked
way point.
2. Select
DELETE.
3. At the prompt, “ARE YOU SURE YOU WANT TO CONTINUE?” select
YES. The way point is deleted.
TO USE THE COMPASS
From the main menu, select
COMPASS . The COMPASS screen displays.
NOTE: When using the compass, hold the Handheld Device up to a 45° angle
and point the antenna forward along your line of travel.
The COMPASS screen allows you to see your current heading and track the
bearing to pre-defined way points. The compass shows north as a red N and
will rotate as you move to keep its orientation. Your current heading is shown
at the lower right corner of the display.
TO GO TO YOUR START POINT
NOTE: You must have first set a start point before you can use the compass
to navigate to it (see page 24). And, you must have a good GPS lock of your
current location.
1. From the main menu, select
COMPASS. The compass screen displays.
2. Select
GO TO START. The compass screen now displays the bearing and distance to your starting location.
3. Face the direction toward the starting location then follow the best route to that location.
Always be alert to your surroundings when navigating to a way point.
Do not cross dangerous terrain or obstacles as you move.
TO GO TO A WAY POINT:
NOTE: You must have first created a way point before you can use the
compass to navigate to it (see page 24). And, you must have a good GPS lock
of your current location.
1. From the main menu, select
COMPASS. The compass screen displays.
2. Select
GO TO POINT. A list of pre-defined way points displays.
3. Select the desired way point. The compass screen now displays the
bearing and distance to the way point .
TO GO TO A WAY POINT (VIA WAY POINT MENU)
1. From the main menu, select
WAY POINTS
> way point name
where
way point name is a previously marked way point.
2. Select
GO TO. The compass screen displays with the bearing and
distance to the selected way point.
