20
1-800-732-0144
Can I program my SportHunter
®
1825 to
work with my other SportDOG Brand
®
systems?
Yes. You can program your SportHunter 1825 to work with SD-425,
SD-425S, SD-425CAMO, SD-825, SD-1225, SD-1825CAMO, SD-1875,
SD-2525, or SD-3225 systems. Because it operates at a different
frequency it is not backwards compatible with any other SportDOG
Brand system.
My Remote Transmitter is sending a
signal to more than one Collar Receiver
unintentionally; what should I do?
In the rare event this occurs, you can change your Remote
Transmitter’s ID Code (see Change ID Codes on Page 17) to solve
this.
TROUBLESHOOTING
The answers to these questions should help you solve any problem you have with this system. If they do not,
please contact the Customer Care Center at 1-800-732-0144 or visit our website at www.sportdog.com.
My dog is not responding when I press
a button.
The Collar Receiver will not turn on.
The Collar Receiver is not responding
to the Remote Transmitter.
• Check to see if the Collar Receiver has been turned on and the
Indicator Light is flashing.
• If your range has reduced from the first time you have used
it, please check to see if the battery is low in either the Remote
Transmitter or Collar Receiver.
• Many factors can impact the range you have with the
SportHunter 1825. For a list of these factors, please refer to
“How the System Works”.
•
You can verify the Collar Receiver is delivering static
stimulation to your dog by placing the test light, enclosed
in your kit, on the Collar Receiver. Please refer to the “Test
Light Instructions” section for details.
• Increase the Intensity Dial. Refer to “Find the Best Intensity
Level for Your Dog” for more information.
• Increase the Static Stimulation Range. Refer to “Changing
Static Stimulation Ranges” for more information.
• Make sure the Collar Receiver’s Contact Points are placed
snugly against your dog’s skin. Refer to “Fit the Collar Receiver”
for more information.
• You may need to switch to the longer Contact Points included
with your system or trim the hair beneath the Contact Points.
• If you notice your operating time dropping to about half the
original time, your Collar Receiver battery needs to be replaced.
Contact the Customer Care Center to purchase a new one.
• Make sure the Collar Receiver has been charged. The Collar
Receiver will charge in 2 hours.
• Make sure the Remote Transmitter has been charged. The
Remote Transmitter will charge in 2 hours.
• Verify the Collar Receiver has been turned on and the Indicator
Light is flashing. Refer to “Turning the Collar Receiver On and Off.”
• Refer to “Match the Collar Receiver and Remote Transmitter.”
