16
1-800-732-0144
STEP :: 06
MATCH THE COLLAR RECEIVER AND REMOTE TRANSMITTER
To match the Collar Receiver to work with a new Remote Transmitter or to reprogram a new Collar Receiver to
work with your existing Remote Transmitter:
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off after 5-6
seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin flashing as
normal. If this occurs, start over and repeat from
A
.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light
flashes 5 times. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been
matched and will begin flashing as normal. If the Receiver Indicator Light does not flash 5 times,
start over and repeat from
A
.
STEP :: 07
PROGRAM THE SYSTEM FOR TWO-DOG OPERATION
SportDOG
®
Collar Receivers can be set to respond to either the
up
or
down
toggle switch position.
A SportDOG Add-A-Dog
®
Collar Receiver must be purchased to train a second dog in two-dog mode.
Please refer
to the back cover for compatible Add-A-Dog Collar Receivers for this system.
STEP :: 08
PROGRAM THE SYSTEM FOR THREE AND SIX-DOG OPERATION
SportDOG
®
Add-A-Dog
®
Collar Receivers must be purchased to train additional dogs.
Please refer to the back cover for compatible Add-A-Dog Collar Receivers for this system.
THREE DOG OPERATION
1. Program the Remote Transmitter to mode 5 in the toggle switch
down
position (see page 15).
2. Then flip the toggle switch to the
black/up
position.
TOGGLE SET TO
BLACK/UP
FOR DOG 1 OR TOGGLE SET TO
ORANGE/DOWN
FOR DOG 2
1. Program the Remote Transmitter to mode 1, 4, 5, 6, or 7 in the toggle
black/up
position or mode 1, 2, 3, 6, 7, or 8 in the toggle
orange/down
position (see pages 13-15).
2. Then flip the toggle switch to the
black/up
position to program the
first Collar Receiver.
A.
Turn the Collar Receiver off.
B.
Press and hold the On/Off Button. The Receiver Indicator Light
will come on, then turn off in 4-5 seconds. If the On/Off Button
is released too early, the Receiver Indicator Light will begin its
normal flashing. If this occurs, start over and repeat from
A
.
C.
After the Receiver Indicator Light has turned off, release the
On/Off Button.
D.
Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light
flashes 5 times.
3. Program the second Collar Receiver the same way using
A
through
D
above, but with the toggle
switch in the
orange/down
position.
