14
1-800-732-0144
TOGGLE SWITCH IN THE UP POSITION
MODE UPPER BUTTON
FUNCTION
LOWER BUTTON
FUNCTION
SIDE BUTTON
FUNCTION
TOGGLE
SWITCH
(up/down)
NUMBER OF
DOGS
1*
Continuous
stimulation (Level set
by intensity dial)
Momentary
stimulation (Level set
by intensity dial)
Tone only
Dog 1 /
Dog 2**
2
2
Continuous
stimulation (Level set
by intensity dial)
Low continuous
stimulation (Level set
by intensity dial)
Tone only
Continuous/
Momentary
1
3
Continuous
stimulation (Level set
by intensity dial)
Continuous
stimulation (Level set
by intensity dial)
Continuous
stimulation (Level set
by intensity dial)
Dogs 1-3 /
Dogs 4-6***
6
4
Continuous
stimulation (Level set
by intensity dial)
Tone only
Remote Beeper
(SD-BEEP)
Call/Locate Mode -
single tone****
Dog 1 /
Dog 2**
2
5
Continuous
stimulation (Level set
by intensity dial)
Momentary
stimulation (Level set
by intensity dial)
Remote Beeper
(SD-BEEP)
Call/Locate Mode -
single tone****
Dog 1 /
Dog 2**
2
6
Continuous
stimulation followed
by a ¼ second delay
tone (Level set
by intensity dial)
Remote Beeper
(SD-BEEP)
Call/Locate Mode -
single tone****
Remote
Launcher*****
Dog 1 /
Dog 2**
2
7
Continuous
stimulation followed
by a ¼ second delay
tone (Level set
by intensity dial)
Momentary
stimulation followed
by a ¼ second delay
tone (Level set
by intensity dial)
Continuous
stimu 2
Dog 1 /
Dog 2**
2
8 (ID
Code)
N/A
N/A
See STEP 9
Up position
N/A
NOTE: Modes 1, 3, 4 ,5, 6, and 7 provide 8 levels of stimulation, which correspond to the setting of the Intensity Dial.
Mode 2 provides more “increments” to choose from – a total of 16 levels of static stimulation. For example, in
mode 2 with the Intensity Dial set at 2, the lower button provides level 3 of 16 and the upper button provides level
4 of 16.
*
Factory Default Mode
** For two-dog operation setup refer to STEP 7 on page 16.
*** For three and six-dog operation setup refer to STEP 8 on page 16.
**** To enable Run Mode, press and hold the corresponding Locate Button for 3 seconds.
***** Remote Launcher: Match your SportHunter
®
1825 Transmitter to your Launcher Receiver by
pressing and holding the Launcher Receiver’s On/Off button. When a “P” appears on the Receiver’s
LCD, press the Upper Button on your Remote Transmitter. Your Remote Transmitter and Launcher
Receiver are now matched. The Side Button on your Remote Transmitter will be used to activate
your Launcher basket.