Data di emissione:
January, 2019
Revisione:
2
Pag. :
30/60
- Empty the bowl of any remaining product.
- Remove both the main lid and then the
transparent one.
- Fill the bowl with lukewarm water to help melt
off any sugar residuals and drain this water
before proceeding with the next step.
Caution
To avoid electrical shock or contact with
moving parts, before proceeding with the
disassembling operations, make sure all
switches are in “OFF” position and that the
main power supply is disconnected.
-
Pull out the upper mixing device (O) by
pushing it slightly backwards, to remove it from
its fixed position (see figure 10).
- Unscrew and slip off the knobs then lower the
bowl to eliminate any product residue through
the dispensing tap.
- Slightly move down the bowl as shown in
figure 11 while pulling it outwards, this
operation will help fully removing it from its
seating.
- Simultaneously apply pressure to the two
securing tabs (Q), and lift the dispensing tap (I)
to pull it out of its fixed position (see figure 12).
- Disassemble the dispensing tap by keeping the
indicated part (R) pressed down and slipping off
the dispensing lever (L) (see figure 13).
- Thoroughly wash each single part with hot
water and mild dishwashing detergent, rinse
well, and reassemble the parts.
Caution
To prevent bacteria growth, remove all
o-rings when cleaning.
Failure to do so could create a health
hazard.
Fig. 10
Fig. 11
Fig. 12
Fig. 13
