Customer Service 1-888-707-1880
Dyaco Canada Inc. 2016
7
STEP 1
Gather
HARDWARE FOR STEP 1
.
1. Tilt the elliptical trainer to one side (you may want to place a piece of Styrofoam or a block under
the unit for support). Install the 3
LEVELERS (81)
to the underside of the unit. Repeat this lever
assembly on opposite side of the unit.
2. Press the 6
END CAPS (82)
into the oval stabilizer tubes.
3. Attach the
TRANSPORT WHEELS (80)
to each bracket with 2
BOLTS (92)
and 2
NUTS (99)
.
Partially tighten with the
13/14MM WRENCH (93)
and
8MM L WRENCH (95)
. Over tightening
the hardware will prevent the wheels from rotating.
4. Attach the
ROLLER WHEEL COVERS (45)
with 4
SCREWS (55)
. Tighten with the screwdriver.
HARDWARE
#55.
M5 × 10m/m
Phillips Head Screw
(4pcs)
#99.
5/16"
Nyloc Nut
(2 pcs)
#92.
5/16" ×1-3/4" Button
Head Socket Bolt
(2 pcs)