Customer Service 1-888-707-1880
Dyaco Canada Inc. 2016
9
STEP 3
1. Gather
HARDWARE FOR STEP 3
.
2. Remove the foam from the console mast axles and the plastic ties from the swing arm tube.
3. The swing arms will be labelled “L” for left and “R” for right. Slide the
WAVE WASHER (110)
and
LEFT SWINGARM (5)
onto the left console mast axle. The swing arms have been
preassembled at the factory to assure a proper fit. The fit will be snug. Please do not force the
arm on the axle or use a hammer, as damage to the bearings could occur.
4. Secure the swing arm to the mast with the
BUSHING WASHER (51)
and the
SOCKET HEAD
CAP BOLT (89)
. Tighten with the
8MM L WRENCH (95)
.
5. Snap-on the decorative
BUSHING COVER (79)
.
6. Repeat these steps on the right side.
HARDWARE
#51.
M10
Bushing Washer
(2 pcs)
#89.
M10 × 20m/m
Socket Head Cap Bolt
(2 pcs)
#110.
Ø25
Wave Washer
(2 pcs)
