9
STEP 3: CONSOLE MAST ASSEMBLY
1. Install the console mast cover (31) onto the console mast (2), making sure it is facing the correct
direction as in the picture below. Run the Computer Cable (44), Handpulse Wire(195), CSAFE
W/Cable(190), TV Signal Cable(191), network W/Cable(192), Console Power Cord(193) and HDMI
Cable(197) through the bottom of the console mast tube and out the top opening.
2. Slide the console mast (2) into the Main Frame (1) being careful to not pinch the wires. Fasten the
console mast with six 5/16” x 5/8” Hex Head Bolts (68) and four 5/16" × 18 × 1.5T flat washers (76)
on the side bolts and two 5/16" × 19 × 1.5T curved washers (83) on the front bolts by using
12.14m/m Wrench (112).
Snap the console mast cover in place.
3. Install the Mast Handle bar Assembly (3) onto the console mast (2) with two 5/16” x 5/8” Hex Head
Bolts (68), 5/16" × 1.5T split washers (82) and 5/16" × 18 × 1.5T flat washers (76) by using
12.14m/m Wrench(112).
Содержание CR800 ENT
Страница 7: ...6 Tools 114 Phillips Screw Driver 1 pc 112 12 14mm Wrench 1 pc 132 14 15mm Wrench 1 pc ...
Страница 13: ...12 Tools 93 Phillips Screw Driver 1pc 100 12 14mm Wrench 1pc 117 13 15mm Wrench 1pc ...
Страница 39: ...38 Recumbent Exploded View Diagram ...
Страница 44: ...43 Upright Exploded View Diagram ...