Spirit CR800 ENT, Руководство пользователя

Страница: 11 / 47

10
STEP 4: CONSOLE, SEAT, COVERS, PEDALS
1. Install the Seat (61) to the seat carriage (4) with four M6 x 18mm Phillips Head Screws (186).
2. Install the front and rear stabilizer covers (32 & 37) and secure to the Main Frame(1) with six M5 x
12mm Phillips Head Screws (99).
3. Connect the Computer Cable (44) with the Computer Cable (44), Handpulse Wire(195), CSAFE
W/Cable(190), TV Signal Cable(191), network W/Cable(192), Console Power Cord(193) and HDMI
Cable(197) to the corresponding connectors on the back of the console(19). Install the console onto
the console mast and secure with four M5 x12mm Phillips Head Screws (99) by using Phillips Head
Screw Driver (114).
Being careful to not pinch the wires.
4. Install the left and right Drink Bottle Holders (39 & 38) to the Seat Handle Bar(6) with four 4 × 16
m/m Sheet Metal Screws (105) by using Phillips Head Screw Driver (114).
5. Install the Pedals (116 L, 117 R) into the Crank Arms (51L, 51R) by using 14.15m/m Wrench
(132).Remember that the left pedal has a reverse thread and will be screwed into the crank in the
opposite rotation from normal threads. There is an “L” stamped into the end of the threaded post of
the left pedal and an “R” in the right. Make sure to tighten the pedals as much as you possibly can.
It may be necessary to re-tighten the pedals if you feel a thumping during pedaling the bike. A
clicking noise, or thumping, sound during pedaling is usually caused by the pedals being too loose.