Customer Service 1-888-707-1880
Dyaco Canada Inc. 2021
Email: [email protected]
19
FUNCTIONS OF THIS TREADMILL
The touchscreen is used for operating most functions of the treadmill. You can directly touch any button on the
screen, or use the Quick Operating Buttons to control the treadmill'
s various functions. The Speed ▲/▼ buttons
control the speed, the Start button begins the workout, the Stop button will pause or stop the workout, and
Incline ▲/▼ buttons control the degree of incline of the treadmill.
QUICK START
Press the Start button to begin belt movement at 0.5 mph then adjust to the desired speed using the
Speed ▲/▼ button.
•
To slow the treadmill belt, press the Speed ▼key until the desired speed is reached.
•
To stop the tread belt press and release Stop button.
PAUSE/STOP
When the treadmill is running, the PAUSE feature may be utilized by pressing the red Stop button once.
This will slowly decelerate the tread belt to a stop. The incline will go to zero percent. The Time,
Distance and Calorie readings will hold while the unit is in the pause mode. After 5 minutes the display
will reset and return to the startup screen.
•
To resume your exercise when in PAUSE mode, press the Start button.
•
Pressing the Stop button twice will end the program and a workout summary will be displayed. If
the Stop button is pressed a third time, the console will return to the idle mode (startup screen).
INCLINE
Incline may be adjusted any time after the belt starts moving.
•
Press and hold the adjustment Incline ▲/▼ buttons to achieve desired level of incline.
HEART RATE FEATURE
The Pulse (Heart Rate) on the screen shows the current value of the heartbeats per minute. You must
use both left and right stainless steel sensors to pick up your pulse. Pulse values are displayed
anytime the computer is receiving a signal from the hand pulse sensors. You may use the hand pulse
sensors while in Heart Rate Control. The CT800ENT will also pick up wireless heart rate transmitters
that are Polar and Bluetooth compatible.
