Spirit Fires FR850-NV, Техническое руководство и руководство пользователя

Страница: 41 / 54

Page 41 of 54
Operating instruction
Lighting the Fire with The Handset
Read this First
Mode –
MAN (Manual), Zzz
(Snooze), thermostat or timed
.
Time (12hour or 24 hr
display)
In Range of fire
(missing if not in
range or if Fire
Control turned off)
Room Temperature
Handset Unlocked
when Illuminated
To change handset
settings
(see handbook)
Press to increase
flame
Power Button – To start the fire , with one hand grasp around the rear of both sides of the button
area control. The green unlock light will illuminate. Keep the handset held to keep the control
unlocked, to enable operation of the buttons. Then with the other hand touch and hold a finger on
the power button for about 3 seconds. (A short beep and a flash of the unlock light will happen upon
touching.) When the word “pilot” appears at the bottom left hand corner of the display, immediately
release the power button. (A second flash of the unlock light and a longer beep will also sound at the
time to release the power button). The Fire should be lit within a few seconds. ( N.B. If power
button is held for more than a few seconds after second flash/beep/word pilot appears, the command
is ignored for safety reasons. Similarly if it is released too soon before the word pilot appears, the
command is also ignored. With this system, the control has been designed to ensure that only
intended ignition of the fire occurs.). To
stop the fire , hold the handset so that it unlocks, press
then release power button.
Press to decrease flame
To change mode
(see handbook)
Light sensor
(for display back
light)
Battery condition –
RC handset, FC
fire control
Gas fire burner
status
Day of the week