Page 32 of 54
Burner Flame
The flame on this type of appliance is normally directed towards the rear of the
enclosure. This is normal due to the opening size and flue system. The flame
will never stand “upright”. It is to be expected that over time the surface on the
rear of the enclosure will tarnish. This is typical “wear and tear” for a gas fire.
If the flame is drawn under the shelf this highlights a serious installation fault
and the appliance must not be operated until the cause of the flame reversal is
found. A typical cause would be unsealed burner holes, failure to seal the
enclosure and flue, downdraft on the flue system or incorrect flue system. If the
fire is operated with flame reversal the remote will be damaged and any
resulting heat damage is not covered by the warranty.
Remote Control Components
The remote control used on this fire has only a small number of components to
function:
a)
A black remote box / gas control valve
b)
An ignition lead
c)
A Pilot Assembly
d)
A Hand Set
The remote is built to the latest standards and is new to the UK market. Take
some time to review the lighting procedure and learn about the operation of the
remote.
Remote Control – Error Codes
If a fault occurs the handset will show an error code. Use the attached sheets to
learn about the codes and how to rectify the fault displayed. To reset the error
press the power button on the handset and it will return to normal operation.
NOTE: If you do not have the Error Code sheet call 01325-327221, ask for
customer services and a copy can be sent by email. Do not attempt to repair
the fire without the error code sheet as it will identify the problem leading to a
quick and cost effective repair.
Содержание FR850-NV
Страница 7: ...Page 7 of 54 Construction Dimensions FR 850 V FR 850 NV...
Страница 23: ...Page 23 of 54 Add logs numbered 14 17 Add logs numbered 5 8 Add logs numbered 15 11...
Страница 24: ...Page 24 of 54 Add logs numbered 16 6 Add logs numbered 10 12 Final layout...
Страница 36: ...Page 36 of 54...
