2-01
DGP000814AAA
GSS6100 and SimCHAN user manual
© Spirent Communications Plc 2005 - 2007
E-3
BITE response message
Bit String
Description
10
USB – Error 2: Program fault.
A fault occurred in the USB algorithm.
11
USB – Error 3: Suspend request(?)
A suspend request was detected
12
USB – Error 4: Unexpected interrupt
An unexpected USB interrupt was detected.
13
RF – Reference oscillator out-of-lock
The reference oscillator is out-of-lock
14
RF - LO1 out-of-lock
Local oscillator 1 is out-of-lock
15
RF - LO2 out-of-lock
Local oscillator 2 is out-of-lock
16
DSP – NAVD underrun
A DSP ran out of NAV data
17
EEPROM - Load error
There was an error reading from the EEPROM
18
EEPROM - Save error
There was an error writing to the EEPROM
19
EEPROM - Invalid contents
The firmware detected invalid EEPROM contents
20
TIMER - Timer FPGA load error
The firmware was unable to load the Timer FPGA correctly.
21
DSP – DSP FPGA load error
The firmware was unable to load the DSP FPGA correctly.
22
Motherboard – Wrong EPLD version
An invalid Motherboard EPLD version was detected.
23
DSP board - Wrong EPLD version
An invalid DSP board EPLD version was detected.
24
MOD – DSP PLL out-of-lock
The Modulator DSP PLL is out of lock