Spirent DLS 6700, Руководство по эксплуатации

Страница: 39 / 48

DLS 6700 Operating Manual
Spirent Communications
7104000557
Page 11-1
11. SAFETY
11.1 Information
11.1.1 Protective Isolation
The DLS 6700 is isolated from hazardous AC line voltages by the supplied AC/DC
adapter. If the AC/DC adapter comes with a protective earth terminal, never wilfully
interrupt this connection.
11.1.2 Before Operating the Unit
• Inspect the equipment for any signs of damage, and read this manual thoroughly.
• Become familiar with all safety symbols and instructions in this manual to ensure
that the equipment is used and maintained safely.
11.1.3 Power Supply Requirements
AC Power: 100-240 VAC (±10%) 50/60 Hz
DC Power: DC used by the unit must be between 8.5 and 12 V. Note that the
polarity of the DC Plug is: The inner conductor is positive (+) and the
outer conductor is negative (-). See symbols in the Safety section. The
maximum current taken is 400 mA.
11.1.4 Fuse Configuration
There are no fuses used in the unit. A non-replaceable thermal fuse is used in the
supplied AC/DC adapter.
11.1.5 Connections to a Power Supply
In accordance with international safety standards, the unit uses an approved AC/DC
adapter.
AC Power:
100-240 VAC ( ± 10%) 50/60 Hz with with supplied adapter.
DC Power: DC used by the unit must be between 8.5 and 12 V. Note that the
polarity of the DC Plug is: The inner conductor is positive (+) and the
outer conductor is negative (-). See symbols in the Safety section. The
maximum current taken is 400 mA.
11.1.6 Operating Environment
To prevent potential fire or shock hazard, do not expose the equipment to any source
of excessive moisture.