Spirent DLS 6700, Руководство по эксплуатации

Страница: 9 / 48

Chapter 2: GETTING STARTED
Spirent Communications
7104000557
Page 2-3
Figure 2.2 DLS 6700 Back Panel
1) Power Input: Connect to an AC wall adapter power source
2) RS–232 (DCE) Serial Connector: Connect to a computer for remote control
3) RJ - 11 “Output” : (8, 12 or 18, depending on model) Connect to DUT (usu-
ally DSLAM devices).
4) Ground Connection: Connect to earth ground (optional)
5) RJ - 11 “Input”: (8, 12 or 18, depending on model) Connect to DUT (usually
CPE modems).
2.5.1 Connecting to Power
Connect the unit via the wall plug-in adapter (provided with the unit) at the back of
the unit to an AC power supply appropriate for your specific country. Please see Chap-
ter 10 "SPECIFICATIONS" for more details.
The power LED will turn on when the power is connected.
WARNING
Before operating the unit, please refer to Section 11.1.5 "Connections
to a Power Supply", to ensure that the correct AC/DC adapter is used.
NOTE
Please refer to
Chapter 11 "SAFETY"
for more details.
2.5.2 Connecting to Analog Devices with RJ-11 Connectors
In a typical setup the Telephone Exchange (Central Office) equipment would be con-
nected to an “Output” Port, and the customer site equipment to the corresponding
“Input” Port of the DLS 6700 wireline simulator. The pinout of the RJ-11 female con-
nector is shown in Figure 2.3.
9
18
1
10
INPUT OUTPUT
DB-25
Power
500 mA Max
12V DC
1 9
10 18
1 2
3
4
5