Spire 740-0788P, Инструкция по установке и руководство по эксплуатации и уходу

Страница: 16 / 61

Conversion from LP Gas to Natural
Gas
Installation of the regulator
1. Turn off all burner control valves.
2. Turn off the main gas supply valve.
3. Disconnect 20 lb propane tank (if present) and remove the
tank from the grill cabinet.
4. Use a Phillips screwdriver to remove the 2-piece 90
°
clamp mounting bracket from the cabinet wall.
5. Use an adjustable wrench to remove the LP gas pressure
regulator/hose assembly from the 90
°
brass adapter.
6. Install the Natural gas pressure regulator onto the flexible
gas hose from the grill.
16
Change Grill Main Burner Valve Orifices
1. Remove the grates and flame tamers.
2. Remove the 2 screws and cotter clip that hold the burner in
place. Set the screw and clip aside.
3. Remove the burner from the grill by lifting the burner out
7. Check that the Natural gas pressure regulator is
positioned under the grill (as shown in the following
illustration) and is not pinched or kinked.
Use 4 screws to attach the Natural gas pressure regulator
to the back of the enclosure