IM-IBR16-32IN
Issue 1
14
6.4 How to access the mechanism assembly
To gain access to the mechanism assembly (
13
) the cover (
2
) needs to be removed. For
this, and any servicing, the trap may remain in the pipeline.
-
Ensure the trap is depressurised (see 'Section 6.1 - General information')
-
Unscrew the 14 off cover nuts (
5
) and remove the cover (
2
) and cover gasket (
3
). The
cover (
2
) weighs in the region of 35 kg (77 lb) and threaded connections are provided (one
at each end) for the use of M12 lifting eyes. Place the cover (
2
) down in such a manner
as not to damage the gasket face.
-
The mechanism assembly (
13
) will now be clearly visible. It is retained to the body by
2 off M12 assembly studs and nuts (
18a
and
18b
), Figure 7. These are located at the
opposite end to the float (
14
). Unscrew the 2 assembly nuts (
18b
) and remove the
mechanism assembly (
13
) and assembly gasket (
19
).
Fig. 6 Cover removal
5
Provision for
a lifting eye
2
3
13
and
14
Provision for
a lifting eye
Dowel
Содержание FTC80
Страница 2: ...IM IBR16 32IN Issue 1 2 ...
Страница 21: ...IM IBR16 32IN Issue 1 21 5 15 Air vent bleed screw 12 Fig 12 18b 11 27 ...
Страница 24: ...IM IBR16 32IN Issue 1 24 ...
