Spinning spinner AERO, Руководство пользователя

Страница: 20 / 26

20
STEP 4B: INSTALL WATER BOTTLE HOLDER AND
THE TABLET MOUNT
Locate the 2 bar washers and 4 bolts as shown and
align the holes with the threaded bosses underneath
the center section. Use the allen wrench to tighten
the allen bolts securely.
STEP 4C: ATTACH THE TABLET CLAMP TO THE ARM
Push in and slide down gently to fully engage the
snap locks as shown. Note the orientation of the tabs
and slots.
Pivot bolts can be tightened for a stiffer angle
adjustment and should always be snug.
Use caution and
do not over-tighten these bolts
.
4
5B
6
STEP 4A: HANDLEBAR ASSEMBLY
Insert the chrome handlebar post onto the threaded
handlebar stem making sure the holes line up. Using
a 5mm Allen wrench, insert, then tighten the two
large bolts on the front of the bar. Now insert, then
secure, the 3mm bolt at the rear of the post.
Check to make sure that all the
bolts are tightened securely
before proceeding.
5A
STEP 4D: INSTALL THE HANDLEBARS
Install the large handlebar pop-pin knob
into the frame head tube several turns
only, then pull out and hold the handlebar
pop-pin knob. Slide the handlebar post all
the way into the handlebar tube. Release
the handlebar pop-pin knob. Adjust the
handlebars to make sure that the pop-pin
is engaged. Tighten the handlebar pop-pin
bolts securely before riding.
STEP 4E: ATTACH THE TABLET
Open holder tabs using two hands and
place tablet securely. Use caution to
keep tablet side controls away from the
holder tabs.
7