LifeCore Fitness Inc. | 5803 Newton Dr. Suite B. | Carlsbad, CA 92008
Phone: 760-599-4555 Toll Free: 888-815-5559 Fax: 760-599-4554
INSTRUCTIONAL VIDEOS FOR THE ASSAULT AIRBIKE
Any questions, please contact Garrett Reder at
760-481-5555
.
TOOLS NEEDED FOR ASSEMBLY (
Please use tools other than what comes with the bike
):
22mm Wrench
15mm Wrench
13mm Wrench
6mm Allen Key
8mm Allen Key
22mm Socket
½ inch driver
½ extension
ASSEMBLY VIDEO:
https://www.youtube.com/watch?v=rwyQD2ih6M0
(Please note that this is correct, except shows old linkage arms)
Updates for 2015-2016
o
New Spherical Bearing Linkage Arms
o
Hardware is already installed on Frame (No parts bag)
TIGHTEN HANDLEBARS AND PEGS – VERY IMPORTANT
Tighten the Right and Left Handlebar Assemblies
Pivot to the main frame by rotating the 22mm open
ended wrench in a clockwise direction.
Loosen the Peg Fixing Nut from the Handlebar
Assembly Pivot with 22mm socket wrench, rotating
in a counter-clockwise direction.
Tighten the Peg by inserting a long screwdriver
through the holes near the end of the peg and
tighten firmly in a clockwise direction.
Re-tighten the Peg Fixing Nut with the 22mm socket
wrench by rotating in a clockwise direction.
Handlebar Pivot Assembly
Tool: 22 mm Open End Wrench
Foot Peg
Tool: 22 mm Socket Wrench