SPIDER CROSS LINER, Руководство оператора, Страница: 39 / 62

Operator’s Manual – Spider CROSS LINER
39 / 62
MOWER
– SERVICE POINTS
* Not included in the LITE version
To get access to the engine compartment and chassis wings:
1) Place the mower on a level and solid surface.
2) Switch off the mower using the CENTRAL STOP button and remove the key. Switch off the remote control.
3) Unscrew the 4 nuts on top of the chassis wings covers (17 mm socket wrench with extension to prevent
damage to the covers).
4) Remove engine and chassis wing covers.
To get access to the cutting device:
1) Place the mower on a level and solid surface.
2) Switch off the mower using the CENTRAL STOP button and remove the key.
3) Place the mower in
the vertical service position .
4) Remove the cutting blade (19mm socket wrench).
5) Remove the four bolts on the mowing mechanism cover (10 mm socket wrench).
WARNING
In the mowing mechanism area, the grass settles continuously. Make sure that the area is always clean.
STABILIZING
WINCH*
STABILIZING
WINCH
CHASSIS
WINGS
KŘÍDLA
HYDRAULIC
TANK
HYDRAULIC
SYSTEM
FUEL TANK
FUEL SYSTEM
WHEEL
PORTAL
PORTÁL
CONTROL
UNIT
CONTROL
UNIT
HEIGHT OF
CUT HANDLE
MADLO
ZDVIHU
WINCH GUIDE
STABILIZING
WINCH