Sperry Marine 5016-CA, Руководство по эксплуатации, установке и обслуживанию

Страница: 48 / 132

056376/A Analogue Compass Repeaters
5-8 Steering Repeater / Magnetic Heading Repeater
5.2 Steering Repeater / Magnetic Heading Repeater
The steering repeater, type 5016-CB, and the magnetic heading repeater,
type 5016-CC; are supplied with four attachment columns and mounting
clamps for installation in a standard Sperry Marine console frame or
directly into a console cutout.
In case of direct console mounting, the shipyard is to cut a square open-
ing into the console as per dimension drawing 5016-0112-02.
To install the repeater in a console frame:
1. Loosen the four screws on the attachment columns and rotate the
mounting clamps inward.
2. Connect the repeater cable to the shipside terminals as per the wir-
ing diagrams and connection drawings provided.
3. Install a ground strap between the ground tab at the back of the
repeater housing and ship’s ground.
4. In case a custom configuration is required, configure the repeater
now using the SUSI application (see chapter 6, ‘Configuration”).
5. Insert the repeater into the frame.
6. Rotate the mounting clamps outward and fasten them with the
retaining screws.
7. Power up the compass system and carry out a full functional test of
the repeater.
CAUTION
Risk of damage
The compass repeaters are heavy instruments. The compass repeater
cables are not designed for holding the repeater just with the cable.
Never hold or transport the repeater on the cable alone when installing
or wearing a compass repeater.