Sperry Marine 5016-CA, Руководство по эксплуатации, установке и обслуживанию

Страница: 51 / 132

Analogue Compass Repeaters 056376/A
Bulkhead Repeater 5-11
3. Install the connection box at an easily accessible location close to
the repeater.
4. Remove the cover plate from the box.
5. Shorten the repeater and shipside connection cables as required.
6. Remove the cable jacket from the ends of the connection cables,
draw back the cable screens and insert the cables into the connec-
tion box through the cable glands.
7. Firmly tighten the cable glands. Make sure to establish a solid con-
nection between the screens and ship’s ground via the glands.
8. Connect the repeater and shipside wires to the terminal blocks as
per the wiring diagrams and connection drawings provided.
9. In case a custom configuration is required, configure the repeater
now using the SUSI application (see chapter 6, ‘Configuration”).
10. Attach the cover plate to the connection box, power up the compass
system and carry out a full functional test of the repeater.