Speidel 47014, Руководство по эксплуатации

Страница: 5 / 16

Pressure cask
Page 5 of 16
•
If purchasing a CO
2
bottle, a TÜV inspection is required every 10 years. Please
contact your gas specialist.
•
To refill any gas bottle, we highly recommend contacting you local gas specialist. You
may also have your gas bottle refilled at a specialised beverage supply firm.
•
If using CO
2
for pressurisation, please ensure that the gas bonds with the beverage and
carbonic acid is formed. If you remove the gas supply, the pressure inside of the cask
will be reduced (this is a natural reaction when carbonic acid forms in the beverage).
•
When tapping the average, foam will be generated. Therefore, it is recommended to
use a mug with a large belly and opening.
•
Never fill the pressure cask to its rim. Always leave at least several centimeters of air
space from the top.
•
Use the tap carefully! Larger or coarse pieces of fruit should be filtered out after
pressing and before filling the cask.
•
Ensure to keep oxygen out of the pressure cask.
4 Introduction of the pressure cask
4.1 Components and scope of supply
Basic equipment:
•
Stainless steel pressure vessel (unpacked)
•
Tap (A) (in carton) consisting of: stainless steal threat with seal, pressure gauge (0 to
15 bar), certified safety valve, stainless steel riser pipe for top discharge with ball
valve, optional blind plug for gas set.
Accessories:
•
Gas set consisting of coupler unit (1) , connecting the cask's threaded connection and
hose; hose (2), quick-release (3) to connect between hose and pressure relief valve,
seals (Order No.: 47015)
•
Pressure relief valve for CO
2
. (Order No.: 47057)
•
2-kg gas bottle (CO
2
/carbon dioxide). (Order No.: 47058)
•
Cleaning brush, with drill attachment (Order No.: 47009)
4.2 Technical data
Cask dimensions: Ø40cm x H54cm
Dimensions incl. installed fittings Ø40cm x H83cm
Weight: 12.0 kg
Weight incl. tap: 13.5 kg
Max. operating pressure 10 bar
4.3 Prior to first use
Prior to its first use, ensure to clean the cask and the tap one more time – refer to Chapter
"Cleaning instructions for the pressure cask".
4.4 How to set up the pressure cask
Prior to its use, the pressure cask must be placed on a solid, stable, and level base frame.
Please note that the pressure cask can weigh up to 60 kg while filled. Avoid an unsteady