KNOW
how to stop the log splitter and disengage the controls before operating it.
NEVER
place hands or feet between the log and splitting wedge during forward or reverse stroke as this could result in
serious injury or death.
NEVER
straddle or step over the log splitter during operation.
NEVER
reach or bend over the log splitter to pick up a log.
NEVER
try to split two logs on top of each other.
NEVER
try to cross split a log.
NEVER
attempt to load your log splitter when the ram or wedge is in motion.
NEVER
use your foot, a rope or any extension device to operate the controls. Only use both hands.
NEVER
move the log splitter while the engine is running. Shut off the engine even if you are leaving the log splitter for a
short period of time.
NEVER
touch the muffler and other hot areas of the engine during operation. Wait until the engine cools down.
Page 4
ALWAYS
block the wheels to prevent movement of the log splitter while in operation.
NEVER
place hands, body parts or clothing under the shrouds during operation.Moving parts could cause entanglement.
ALWAYS
load the log onto the beam cradle up against the wedge.
ALWAYS
be careful when moving or lifting the log splitter. Get assistance if it feels to heavy to move by yourself.
OPERATION OF THE LOG SPLITTER
The log splitter is designed for a single operator, who stands in the “operator zone”, using the right hand to operate the
control handle, and the left hand to press the Start button. Failure to operate the log splitter in this position can result in
serious injury or death.
TOP VIEW
OPERATOR
ZONE
