Spectrum RAC2V1A, Руководство пользователя

Страница: 15 / 93

RAC2V1A Router User Guide 15
Basic Configuration
The router ships with a basic factory default configuration that should
allow you to immediately access the Internet after installing the
hardware according to the instructions in this guide.
If you need to modify the router's default basic settings, or if you want
to configure advanced settings, refer to the appropriate instructions in
this document.
Wireless LAN Default Security Setting: The router ships with wireless
LAN security set by default. See the security label on the product for the
factory security settings: Wi-Fi network name (SSID) and Wi-Fi
password.
If you need to modify the router’s default wireless security settings, or if
you want to configure any other settings, refer to the appropriate
instructions in this document.
Note: You may set up the computer and other client devices to work
with the security settings on the router. Most client devices support the
WPA2 default security standard in the router. Refer to the
documentation for the client device for instructions on setting security.
If the computer or client device supports Wi-Fi Alliance WPS (Wireless
Protected Setup), activate WPS on the computer or client device and
the router simultaneously to easily set up the Wi-Fi security.
Accessing the Configuration Interface
Perform the following steps to access the configuration interface.
1. If security has been properly set up on the computer to access the
wireless LAN on the router, use the connection utility for the
operating system to connect to the wireless LAN using its Wi-Fi
network name (SSID), as shown on the security label.
Note: If you cannot access the wireless LAN, you must first establish
a wired Ethernet connection between the computer and the router.
2. In the web browser, open the page http://192.168.1.1/ to access the
router setup. The sign-in screen for the router displays.