Spectrum Mopit 4, Руководство оператора и сервисное руководство, Страница: 16 / 32

Page 16
MAINTENANCE / SERVICE
Brush Motor Replacement
On rare occasions the brush motor may need to be replaced. Please call Spec-
trum at 1-800-290-2833 to troubleshoot and see if your brush motor needs to
be replaced.
You do not need to remove either of the plastic tanks for motor replacement.
It is easiest to replace the brush motor with the Mopit on its back.
You will need a 7/16 socket, 5/32, 1/8, and 3/16 Allen wrenches
1. Follow the steps on page 11 to remove the belt
2. Remove the two pulleys by using a 1/8 Allen wrench to remove the set
screws
3. Remove the five Allen bolts using a 5/32 Allen wrench
4. Pull the brush motor plate out of the machine. There is enough wire on the
brush motor so you should be able to set the whole assembly on the
ground without disconnecting the wiring
5. Remove the two motor screws using a 1/8 Allen wrench
6. Replacement is the above steps in reverse
7. HINTS: Make sure that
the motor pulley is
touching only the motor
shaft, not the motor
base. Make sure that
you tighten the set
screws onto the flats of
the shafts.
FOR PARTS AND SERVICE 1-800-290-2833