14
M3i.48xx / M3i.48xx-exp Manual
Hardware information
Introduction
Multi Purpose I/O lines (front-plate)
BaseXIO Option
Connectors (Standard Card)
Connectors (Option M3i.xxxx-SMA)
Connectors (Option M3i.xxxx-SMAM)
Environmental and Physical Details
M3i.4830
M3i.4831
M3i.4840
M3i.4841
M3i.4860
M3i.4861
min sampling clock
9 MS/s
9 MS/s
9 MS/s
9 MS/s
9 MS/s
9 MS/s
max internal clock (1 channel active)
65 MS/s
65 MS/s
105 MS/s
105 MS/s
180 MS/s
180 MS/s
max internal clock (2 channels active)
n.a.
65 MS/s
n.a.
105 MS/s
n.a.
180 MS/s
lower bandwidth limit (DC coupling)
0 Hz
0 Hz
0 Hz
0 Hz
0 Hz
0 Hz
lower bandwidth limit (AC coupled, 50 Ohm)
<30 kHz
<30 kHz
<30 kHz
<30 kHz
<30 kHz
<30 kHz
lower bandwidth limit (AC coupled, 1 MOhm)
<2 Hz
<2 Hz
<2 Hz
<2 Hz
<2 Hz
<2 Hz
-3 dB bandwidth (buffered path)
30 MHz
30 MHz
45 MHz
45 MHz
70 MHz
70 MHz
-3 dB bandwidth (50 ohm path)
35 MHz
35 MHz
50 MHz
50 MHz
90 MHz
90 MHz
-3 dB bandwidth (BW limit enabled)
10 MHz
10 MHz
20 MHz
20 MHz
20 MHz
20 MHz
Number of multi purpose lines
two, named X0, X1
Input: available signal types
software programmable
Trigger-In, Asynchronous Digital-In, Synchrounous Digital-In, Timestamp Reference Clock
Input: impedance
10 k
Ω
to 3.3 V
Input: maximum voltage level
-0.3 V to +5-5V
Input: signal levels
Low:
≤
0.8 V, High:
≥
2.0 V
Output: available signal types
software programmable
Asynchronous Digital-Out, Trigger Output, Run, Arm
Output: impedance
50
Ω
Output: signal levels
Low:
≤
0.4 V, High:
≥
2.4 V
Output: type
3.3 V LVTTL, TTL compatible for high impedance loads
Output: drive strength
Capable of driving 50
Ω
loads, maximum strength ±64 mA
BaseXIO modes
software programmable
Asynch digital I/O, 2 additional trigger, timestamp reference clock, timestamp digital inputs
BaseXIO direction
software programmable
Each 4 lines can be programmed in direction
BaseXIO input
TTL compatible: Low
≤
0.8 V, High
≥
2.0 V
BaseXIO input impedance
4.7 kOhm towards 3.3 V
BaseXIO input maximum voltage
-0.5 V up to +5.5 V
BaseXIO output type
3.3 V LVTLL
BaseXIO output levels
TTL compatible: Low
≤
0.4 V, High
≥
2.4 V
BaseXIO output drive strength
32 mA maximum current, no 50
Ω
loads
Analog Inputs
3 mm SMB male (one for each single-ended input)
Cable-Type: Cab-3f-xx-xx
Trigger Ext0 Input
1 x MMCX female (one connector)
Cable-Type: Cab-1m-xx-xx
Clock Input/Output
2 x MMCX female (two connectors)
Cable-Type: Cab-1m-xx-xx
Multi Purpose X0 and X1
2 x MMCX female (two connectors)
Cable-Type: Cab-1m-xx-xx
Option BaseXIO
8 x 3 mm SMB male on extra bracket, internally 8 x MMCX female
Analog Inputs
SMA female (one for each single-ended input)
Cable-Type: Cab-3mA-xx-xx
Trigger, Clock I/O, Multi Purpose X0
signals specified at order time
2 x SMA female (two connectors)
Cable-Type: Cab-3mA-xx-xx
Option BaseXIO
8 x 3 mm SMB male on extra bracket, internally 8 x MMCX female
Analog Inputs
SMA female (one for each single-ended input)
Cable-Type: Cab-3mA-xx-xx
Trigger Ext0 Input
1 x MMCX female (one connector)
Cable-Type: Cab-1m-xx-xx
Clock Input/Output
2 x MMCX female (two connectors)
Cable-Type: Cab-1m-xx-xx
Multi Purpose X0 and X1
2 x MMCX female (two connectors)
Cable-Type: Cab-1m-xx-xx
Option BaseXIO
8 x 3 mm SMB male on extra bracket, internally 8 x MMCX female
Dimension (PCB only)
312 mm x 107 mm (full PCI length)
Width (Standard or star-hub 4)
1 full size slot
Width (star-hub 8)
additionally back of adjacent neighbour slots
Width (with option BaseXIO)
additionally extra bracket on neighbour slot
Weight
plain card
320 g
Weight
plain card + option SH4
380g
Weight
plain card + option SH8
400g
Warm up time
10 minutes
Operating temperature
0°C to 50°C
Storage temperature
-10°C to 70°C
Humidity
10% to 90%
