Figure 3B
Glide
0115700R2 Page 4 of 17
2. Install glides and end caps
1. With the table still upside-down, install the glides onto the
legs (4) on fixed / set- and-go, (6) on eLift legs.
Figure 2
.
2. Install the end caps into the tube ends.
Note: If you will be using an optional display
stand, do not install all 4 end caps. Install 2
on the side opposite the display stand only.
Figure 2
2 end caps
2 end caps
(do not install these 2
if using display stand)
glide wrench
(included)
Tools
Required
