Spectrum Controls 2085-IF4XOF4-SC, Руководство пользователя

Страница: 39 / 68

Chapter 3: Configuring the 2085-IF4XOF4-SC Using CCW 3-11
User’s Manual Pub. 0300307-01 Rev. A
• High Clamp Alarm . Specifies whether to clamp the maximum
output as defined by
Range
,
Limit
, or
User
setting. Default is
Range :
• Low Clamp Alarm . Specifies whether to clamp the minimum
output as defined by Range , Limit , or User setting. Default is
Range
:
• Alarm Latch Enable . If the checkbox is enabled, the channel Over
Range, Under Range, or Load Error bit in Output Channel Status
(AI_02:01) will remain set even after the channel output is normal.
To clear the bits, you must set the channel Unlatch Alarm Bits
(AO_04) to clear the bits:
• High Clamp Value . Specifies high value at which output is clamped
if the channel High Clamp Alarm is set to User option:
• Low Clamp Value . Specifies low value at which output is clamped
if the channel Low Clamp Alarm is set to User option:
7. When finished making selections, click
Generate
.
The Configuration Text dialog appears with your configuration settings
for all the channels.