Spectrum Controls 2085-IF4XOF4-SC, Руководство пользователя

Страница: 29 / 68

User’s Manual Pub. 0300307-01 Rev. A
Chapter 3
Configuring the 2085-IF4XOF4-
SC Using CCW
This chapter covers the following subjects:
• System introduction
• 2085-IF4XOF4-SC AOP
• CCW configuration tab
• Setting configuration parameters using MCC
•
Software information
• PLC interfaces
• Product features
• Product performance
• Product safety
• Module-specific errors
System Introduction
You use CCW software (v 9.00.00 and above) to configure the 2085-IF4XOF4-
SC Expansion I/O Module. Your controller firmware must be at v. 9.011 and
above as well. You then send the configuration setup to the module. Starting
from CCW version 11.00.00 and later, the software provides a module-specific
Add-On Profile (AOP) to configure the module. The process for manually
importing AOP to CCW is no longer required.
The Micro850/870 Controller (Bus master) subsystem is located at the left end of
the bus. This subsystem is comprised of:
• Micro850/870 Controller
• 2085 Expansion I/O Modules
• 2085-ECR Bus Terminator
Optional:
• 2080-PS120-240VAC Power Supply (separate module or built-in the
main controller).
• 2080 Plug-in Modules
• 2085-EP24VDC Expansion Power Supply for Micro870 Controller with
more than four 2085 Expansion I/O Modules installed.