Spectrum Controls 2085-IF4XOF4-SC, Руководство пользователя

Страница: 35 / 68

Chapter 3: Configuring the 2085-IF4XOF4-SC Using CCW 3-7
User’s Manual Pub. 0300307-01 Rev. A
-
Decimal. Characters represented as decimals. Example:
32767 7
•
Launch.
Use to populate the file path field. The file path lets you
enter the file path for opening the MCC utility program to assist you
in configuring the module. Use the Browse ellipse to navigate to
where the utility is stored. Then click the
Launch
button to start the
utility.
Setting Configuration
Parameters Using
MCC
You may create the configuration for each channel using the MCC utility
provided by Spectrum Controls, Inc. You download the utility from the Spectrum
Controls website at https://www.spectrumcontrols.com.
To use the MCC utility:
1. The first time you configure a Spectrum Controls 2085 analog module,
you must provide the file path of the utility to the CCW software.
Navigate to the CCW Configuration Tab and click in the file path
textbox below the Launch button.
The
Browse
button appears.
2. Click the button, navigate to the directory where you installed the CCW
program, and select the ModuleConfigConverter tool located in the
Spectrum Tool directory:
7
The valid range for the Decimal Radix indication is from 0 to 65535. It does not accept negative values. If
you need to receive negative values, select the Hex Radix option instead.