Spectrum Controls 2085-IF4XOF4-SC, Руководство пользователя

Страница: 14 / 68

1-6 Chapter 1, Module Overview
User’s Manual Pub. 0300307-01 Rev. A
Output Description Value
Voltage accuracy
(calibrated)
Error at 25 °C, Max Error over -20 °C to 65 °C, Max
0-5 V ±5 mV ±12.5 mV
0-10 V ±20 mV ±50 mV
±10 V ±20 mV ±50 mV
Output Current Repeatability At 25 °C
0-20 mA Better than ±5 µA
4-20 mA Better than ±5 µA
Output Voltage Repeatability At 25 °C
0-5 V Better than ±0.5 mV
0-10 V Better than ±2 mV
±10 V Better than ±2 mV
Output Drive Capability 50 to 500 Ohm with short-circuit survival in current mode
Greater than or equal to 1 Kohm in voltage mode
Load Reactance 100 µH max in current mode
Less than 1 µF in voltage mode
Output Settling Time:
Current Output
Less than 1 ms to 63% of full scale with resistive loads
Output Settling Time:
Voltage Output
Less than 1 ms to 63% of full scale with resistive loads
Output Ripple Less than 30 µA in current mode
Less than 15 mV in voltage mode
Fault detection Over temperature detection is supported in both current and
voltage modes (over 150
°
C).
Open Circuit current loop detection is supported on each channel
in 4 to 20 mA range. A load resistance greater than 500 Ohm
might trigger this fault.
A short on an output pin in voltage mode will be detected, and
output current will be limited to less than 15 mA. A load less than
1 Kohm resistance also triggers this fault.