05311001B / Revision 4
45
1.
Select
Set up.
2.
Select the required transducer and alarm.
Figure 30 - The alarm set up screen
3.
Select the required mode (none, low or high), then press the
soft key.
Figure 31 - The alarm mode screen
4. Scroll up or down to edit the appropriate settings (using the method described in
Section 5.10):
Latching (Section 6.5.2)
Level (sets the gas concentration level at which the alarm is to trigger)
Hysteresis (Section 6.5.3).
The measurement alarm(s) has a 'Follow' option:
If the 'Follow' option is set to 'No', the alarm will be inhibited during calibration
mode.
If the 'Follow' option is set to 'Yes', the alarm will not be inhibited during calibration
mode.
1.
Select
Follow.
2.
Select the required alarm.
Figure 32 - The alarm follow screen
