6 – Installation and set-up
OxyDetect Oxygen Deficiency Gas Detector
42
05311001B / Revision 4
Figure 23 - The mA output high level screen
5.
You can select the during calibration option to 'Freeze' or 'Follow'.
Figure 24 - The during calibration screen
6.
You can then select the Jam condition to 'High', 'Low' or 'None'.
Figure 25 - The jam condition screen
7.
You can then select the range that you would like to use: 0 – 20 mA or 4 –
20 mA.
Figure 26 - The mA output range screen
8.
You can then select the under range value. An under range setting of
4 mA means there is effectively no under range.
