©
Brüel & Kjaer Vibro
●
08/2020
●
C105519.001/v03
●
Page 17 of 32
Technical alterations reserved!
Brüel & Kjaer Vibro
│
Instruction 8315
Hint
EN
UNRESTRICTED DOCUMENT
1 Hint
Figure 1-1)
Acceleration sensor 8315
NOTE!
This manual is a part of the product. Read the manual carefully before using the product and
keep it accessible for future use.
1.1 Pictograms and their Meanings
This symbol warns of dangerous situations which can result from misuse of the product.
1.2 User Qualification
Ensure that all work in conjunction with our systems is performed by skilled, expert and authorized workers (for
ATEX systems according to EN 60079-14). Among these works are:
Installation and Commissioning
Installation and commissioning primarily concern work on electrical equipment. These works may be performed
exclusively by electricians or workers instructed and supervised by an electrician in accordance with
electrotechnical regulations/directives.
Change of System Specification
Any change of system specification has its effects on monitoring process with stationary systems and on the
measuring sequence with portable measuring systems.
