SpectraLink Link 3000 MCU Скачать руководство пользователя | Manualshive

Страница: 20 / 54

background image

SpectraLink Corporation

Installation

Link WTS – Link 3000 MCU

Space for the backboard or rack

Space for the shelves, which are designed for 19” rack or wall mounting.

•

Each shelf measures 15” high X 19” wide X 9” deep, and weighs approximately
35 pounds fully loaded.

•

Expansion shelves cannot be located more than 17 cable feet from the Primary
Shelf.
All digital interface modules must be within 250 feet of the telephone system.
See your telephone system specifications for distance limitations for analog
modules.

Location of the Intershelf Junction Panel (JPI300) adjacent to the shelves on a multi-
shelf system.

•

The Primary Shelf containing the System Controller (CSC or CSO306 or 320)
must be mounted to allow connection to the JPI300 with a five-foot cable.

•

Expansion Shelves (CSC300 or CSO300) must be mounted to allow connection
of the shelf to the JPI300 using 12 feet or less of cabling.

Space for the -48V power supply connections. Power supply conduit requires
clearance of 1.5 inches on the rear or side of the shelves.

Maximum loop length specifications of the telephone system

Maximum wire distance from the MCU to a Base Station (6,000 feet)

Cabling for the Interface Modules and Controller cards. All cables (except power) are
connected to the front face of the cards. Space is provided to route wiring to the back
of the shelf.

Prepare Rack or Wall

The Link 3000 MCU can be mounted in a rack or on the wall. Rack or wall support must
be adequate to support the number of shelves to be installed. Each fully loaded Link 3000
MCU shelf weighs approximately 35 pounds.

Rack Mounting

Before installing shelves in a rack, be sure the rack is mechanically fastened to the
floor or wall such that it properly supports the number of shelves to be mounted.
Follow the manufacturer’s instructions to prepare the rack.
Be sure to leave 1.5” clearance at the rear of the racks for power conduit.

Wall Mounting

Before wall mounting, cover the wall with ¾” plywood. Secure the plywood to
the wall studs every 16 inches with an adequate number of screws to support the
number of shelves to be mounted. Each fully loaded shelf weighs approximately
35 pounds. Be sure to leave 1.5” clearance on the left side for power conduit.

Part Number: 72-0059-01-Ha.doc

Page 20

«
...
18
19
20
21
22
...
»

Содержание Link 3000 MCU























































Отзывы:

Нет отзывов

Похожие инструкции для Link 3000 MCU

Бренд: Karel Страницы: 39

Бренд: Panasonic Страницы: 502

Бренд: NEC Страницы: 8

Бренд: CCL Страницы: 12

Бренд: CCL Страницы: 12

Бренд: CCL Страницы: 17

Бренд: CCL Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды