manualshive.com logo in svg

SpectraLink Link 3000 MCU, Руководство по установке


Поделиться
Скачать
background image

SpectraLink Corporation 

Installation 

 

Link WTS – Link 3000 MCU 

NOTICE 

SpectraLink Corporation has prepared this document for use by SpectraLink personnel and clients. The 
drawings and specifications contained herein are the property of SpectraLink and shall be neither 
reproduced in whole or in part without the prior written approval of SpectraLink, nor be implied to grant 
any license to make, use, or sell equipment manufactured in accordance herewith. 
SpectraLink reserves the right to make changes in specifications and other information contained in this 
document without prior notice, and the reader should in all cases consult SpectraLink to determine whether 
any such changes have been made. 
The terms and conditions governing the sale of SpectraLink hardware products and the licensing of 
SpectraLink software consist solely of those set forth in the written contracts between SpectraLink and its 
customers. No representation or other affirmation of fact contained in this document including but not 
limited to statements regarding capacity, response-time performance, suitability for use, or performance of 
products described herein shall be deemed to be a warranty by SpectraLink for any purpose, or give rise to 
any liability of SpectraLink whatsoever. 
In no event shall SpectraLink be liable for any incidental, indirect, special, or consequential damages 
whatsoever (including but not limited to lost profits) arising out of or related to this document, or the 
information contained in it, even if SpectraLink has been advised, knew, or should have known of the 
possibility of such damages. 

Trademark Information 

SpectraLink 
LinkPlus 
Link Wireless Telephone System 
NetLink Telephony Gateway 
NetLink Wireless Telephone 
NetLink SVP Server 
SpectraLink Voice Priority 
ccLink Wireless Telephone System 
are trademarks and registered trademarks of SpectraLink Corporation. 
All other trademarks used herein are the property of their respective owners. 

Installation 
Link WTS 
Link 3000 MCU 
System Documentation 
© 2002 SpectraLink Corporation. 
All Rights Reserved 
Printed in the United States of America 

SpectraLink Corporation 
5755 Central Avenue 
Boulder, CO 80301 
Within the United States, dial 
303.440.5330 or toll free 
800.676.5465 
Outside the U.S., dial 
+1.303.440.5330 
www.spectralink.com 

 

Part Number: 72-0059-01-Ha.doc 

Page 2 

Содержание Link 3000 MCU























































Отзывы:

Нет отзывов

Похожие инструкции для Link 3000 MCU

Aastra OpenCom 100 series Short Installation Manual preview
OpenCom 100 series
Бренд: Aastra Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды