Spectralink 84-Series Series Wireless Telephones Administration Guide
1725-86984-000_P.docx
September 2016
218
Parameter
Permitted Values
Default
log.render.file.upload.append.limitMode
delete, stop
delete
Behavior when server log file has reached its limit.
delete=delete file and start over stop=stop appending to file
log.render.file.upload.append.sizeLimit
positive integer
512
Maximum log file size that can be stored on provisioning server in Kbytes.
log.render.file.upload.period
positive integer
86400
Time in seconds between log file uploads to the provisioning server. The default is 86400 which is 24 hours.
Note: The log file will not be uploaded if no new events have been logged since the last upload.
log.render.level
0 to 6
1
Specifies the lowest class of event that will be rendered to the [MACaddress]-app.log files.
The log.render.level maps to severity as follows:
0 -
>
Debugging
1 -
>
High Detail
2 -
>
Moderate Detail
3 -
>
Low Detail
4 -
>
Minor Error
5 -
>
Major Error
6 -
>
Fatal Error
log.render.realtime
0 or 1
1
Set to 1. Spectralink recommends that you do not change this value.
log.render.stdout
0 or 1
0
Set to 1. Spectralink recommends that you do not change this value. Note that on Spectralink handsets, the
default value is 0.
log.render.type
0 to 2
2
Refer to Table 10-9: Event Timestamp Formats for timestamp type.
<sched/>
The handset can be configured to schedule certain advanced logging tasks on a periodic basis.
These parameters should be set in consultation with Spectralink Technical Support. Each
scheduled log task is controlled by a unique parameter set starting with log.sched.x where
x
identifies the task. A maximum of 10 schedule logs is allowed.
Table 10-11: Logging Schedule Parameters
Parameter
Permitted Values
log.sched.x.level
0 to 5, default 3
Event class to assign to the log events generated by this command. This needs to be the same or higher than
log.level.change.slog for these events to display in the log.
log.sched.x.name
alphanumeric string
Name of an internal system command to be periodically executed. To be supplied by Spectralink.
log.sched.x.period
positive integer, default 15
Seconds between each command execution. 0=run once
