Spectra Precision SP90m, Руководство пользователя

Страница: 86 / 164

74
Dual-Relative RTK
To configure the receiver as a Dual Relative RTK rover, use the
Web Server as follows:
• Go to
Receiver
>
Position
>
Rover Setup
.
• Set
Processing Mode
to
Dual Relative RTK
.
• Select how the corrections are being transmitted to the
receiver by setting
Input Mode
accordingly.
If you choose
Automatic
, the receiver will find by itself
which of its ports are used to acquire corrections.
If you choose
Manual
, you need to specify each of the two
ports. The “
BRV-1
” line will define the port routing the
corrections from a moving base allowing the receiver to
compute the vector to the primary antenna, whereas the
“
BRV-2
” line will define the port routing the corrections
from a moving base allowing the receiver to compute the
vector to the secondary antenna.
NOTE: The same set of corrections from the same moving
base, hence the same port, can be used for both antennas.
• Additionally, in the
Other Settings
section, you may change
the primary GNSS system used (
GPS
is the default
selection), limit the level of position accuracy to less than
what the receiver can actually achieve in this case.
Typically you will choose
RTK Position
to match to the
selected operating mode.
1
3-D Components
of Vector
3-D Components
of Vector
3-D Ve
ctor
One or two sets of corrections from moving base via:
• Internet (Ethernet, cellular modem, or WiFi), or
• UHF Radio
Corrections
from moving base
to compute
3D-vector
3-D Vector
Corrections
from moving base
to compute
3D-vector
2