Spectra Precision SP90m, Руководство пользователя

Страница: 80 / 164

68
aware the position computed in Relative RTK, in terms of
accuracy, is an SBAS Differential position at best.
• Select the model of dynamics that suits the movement
pattern of your rover best.
• Click
Configure
.
• Set the device used by the receiver to acquire the two sets
of corrections:
– If corrections are received via radio, go to
Receiver
>
Radio
to enter all the radio parameters. You may use
the internal radio or an external radio.
– If corrections are received over the Internet, go to
Receiver
>
Network
to set the device used (this may be
Ethernet, Modem or WiFi; more information about how
to set up theses devices can be found in the relevant
context-sensitive Help). Then go to
Receiver
>
I/Os
to
start data reception in NTRIP or Direct IP mode.
Static or Moving
Base
Using the Web Server
To configure the receiver as a base, use the Web Server as
follows:
• Go to
Receiver
>
Position
>
Base Setup
.
• Use the
Station ID
. field to enter the identification number.
Remember, the station ID should comply with the type of
correction data format the base generates. As a reminder,
this is the list of authorized numbers in relation to the data
format used:
– RTCM 2.3: 0-1023
– CMR/CMR+: 0-31
– ATOM & RTCM3.x: 0-4095
• Indicate whether the base is stationary (
Static
) or in motion
(
Moving
).
If you choose
Static
, you need to specify the exact location
of the base. You can do this in two different ways:
1
Base corrections delivered via:
• Internet (Ethernet, cellular modem, or WiFi), or
• UHF Radio