Spectra Precision SP90m, Руководство пользователя

Страница: 106 / 164

94
Commands List
See below for details.
Command Name & Syntax Function
ANH VERT x.xx
ANH SLANT y.yy Sets antenna height (vertical measurement)
Sets antenna height (slant measurement)
ANR OFF
ANR PC1
ANR ON
ANR SPT
ANR ARP Sets L1 phase center as reference location
Sets L1 phase center as reference location
Sets ground mark as antenna reference location
Sets ground mark as antenna reference location
Sets ARP as reference location
ATH ON
ATH OFF {password} Activates anti-theft function
Deactivates anti-theft function
GETID Returns SP90m identification information
GETMEM Returns memory status
GETPOS Returns last computed position
GETPOWER Returns power status
HELP
HELP {command name} Returns the list of available commands
Returns the syntax of the specified command
MEM INT
MEM SD Sets internal memory as current memory
Sets external SD card as current memory
MODE BASE
MODE ROVER Sets the SP90m as a base receiver
Sets the SP90m as a rover receiver
POS...
POS CUR Provides coordinates to be the reference position
Sets last computed position as reference position
RADIO ON
RADIO CHN INT {channel}
RADIO CHN EXT {channel}
RADIO OFF Powers up the radio
Sets channel number in internal radio device
Sets channel number in external radio device
Turns off radio
REC ON
REC ON 0.5
REC OFF Starts data recording at currently set recording rate
Same but you choose the recording rate
Stops data recording
SEND LOG n ...@...
Asks the SP90m to email its last “n” log files to the
specified email recipient
SEND PAR ...@...
Asks the SP90m to email its operating parameters
to the specified email recipient