Engl
ish
47
• In the left-hand side of the window, browse your computer
to the folder where to copy the files (recipient folder).
• In the right-hand side of the window, highlight the file(s)
you want to copy.
• Click on the
Copy
button. Files are then copied, as
requested. The lower part of the screen provides reports
information on the copy operations in progress.
Deleting Files from the Receiver
• In the right-hand side of the window, double-click on the
sub-folder containing the files you want to delete from the
receiver.
(If needed, click on
to go back to the parent folder and
open another sub-folder.)
• Still in the right-hand side of the window, highlight the
file(s) you want to delete.
• Click on the
Delete
button. Files are then deleted. The
lower part of the screen provides reports information on
the delete operations in progress.
Restoring Factory
Settings
This can be done starting from a powered-off receiver. Just
hold down the Power button for about 10 seconds. This
causes a reset procedure to be started. At the end of this
procedure, all factory settings are restored, except the
following, which are kept unchanged:
• Bluetooth
–
PIN code
–
Receiver’s Bluetooth name
• Anti-Theft & startup protections
–
Current states (enabled or disabled)
–
Password
–
Anti-Theft position
–
Last position computed
Restoring factory settings is not allowed if one of these cases:
• Anti-theft protection is active
• Startup protection is active
• A validity period is active (whether still in progress or
over). (Validity periods are designed to let users work with
the receiver in a predefined configuration and for a limited
period of time.)
