English
40
Installing a Firmware Option
Before you start this procedure, make sure you have received
an email from Spectra Precision containing the POPN
corresponding to the firmware option you have purchased.
NOTE : Your computer needs an Internet connection to install
a firmware option using a POPN.
With the POPN now in your possession, do the following to
install a new firmware option:
• Follow the first three steps described in
• Click
Option
. Wait until SP Loader has detected the
receiver.
SP Loader then displays the serial number of your receiver
and prompts you to enter the POPN.
(There is an alternate method to activate a firmware
option, which is to enter the option key (provided by
Spectra Precision) corresponding to the desired firmware
option, and to specify that option in the nearby field.)
• Enter the POPN and then click on
Update
. Let the receiver
proceed with the installation of the firmware option (a
status window is displayed showing a progress bar).
Take
care not to turn off the receiver while the installation is in
progress
.
• After successful completion of the installation, click
Close
to close the status window.
• Click
Close
again, then
Exit
to quit SP Loader.
