English
34
Using Anti-Theft
and Startup
Protections in
FAST Survey
• Power on the SP60. Wait until the boot sequence is over.
• On the data collector, launch FAST Survey and open a job.
• Tap
Equip
to access the equipment menu.
• Tap on
GPS Base
or
GPS Rover
. Through the four tabs
presented, configure your SP60 as desired.
REMINDER: Anti-Theft protection only makes sense for a
base.
• Tap
to complete the receiver configuration.
• Still from the
Equip
menu, tap on the
GPS Utilities
button.
This opens a menu now including the
Theft Protection
button (this button is added to the menu following the
selection of the SP60 as the type of receiver used).
• Tap on the
Theft Protection
button. This opens a new
window showing the following parameters:
–
Enable Startup Protection
button: Allows you to activate
the startup protection after you have entered the
correct password, as defined below.
–
Enable Anti-Theft
button: Allows you to activate the anti-
theft protection after you have entered the correct
password, as defined below.
–
Password
button: Is used to define the password
needed to activate/deactivate the anti-theft and
startup protections.
Once one of the two protections has been activated,
you can no longer change the password.
