Chapter 6. Using the Serial Port Interface
53
[4] IP subnet mask:
IP network mask (standard IP parameter). This field is not available
while in DHCP mode.
[5] IP gateway:
Gateway address (standard IP parameter). This field is not available while
in DHCP mode.
[6] Enable WINS:
Typing
6
will toggle WINS on and off.
[7] WINS server:
When WINS is enabled, it is necessary to specify the address of the WINS
server.
[8] User Name:
This username parameter is used for authentication for iSCSI and NDMP
protocols. Type
8
, then type a new username.
[9] Password:
Select or change the password. If changing the password, you will be
prompted to enter your password then to re-enter it.
[?] Help:
Displays help for this menu.
[ESC] Return to previous menu:
Returns you to the main menu.
3.
After configuring the unit for your site, tap
Esc
to return to the main menu.
There will be an asterisk (
*
) next to the menu option, indicating that an unsaved
change has been made.
4.
Select
9
to save the changes.
5.
Select
y
when prompted to reboot.
Note:
You must reboot the library in order for the new Ethernet
parameters to take effect.
Procedure Notes
You can continue to configure your library using the serial port, or you can use the
Web interface, which is more user–friendly. Use the information from the Ethernet
Configuration screen to assist with attaching the library to an IP connection. To use the
Web interface, go to
