Chapter 4 - Installation
Installing the Spectra BlackPearl NAS Solution in a Rack
Separate the Rails
If necessary, for each rail, remove the inner rack rail section from the outer rack rail. You will
attach the inner rails to the chassis and the outer rails to the rack.
1.
Orient the rack rail with the open end to the left and the inner rail facing you (see
). The figures below show the right rail.
Figure 18
Location of the hard stop and open ends of the outer rack rail.
2.
Push the end of the inner rail near the hard stop towards the open end of the outer rail
until the self-locking latch engages.
Figure 19
Extend the inner rail beyond the outer rail.
3.
Flip the rail assembly over so the outer rail is on top and the self-locking latch is facing
you (see
).
January 2022
Installation Guide-Spectra BlackPearl NAS Solution
- 37 -
