Chapter 4 - Installation
Installing an HBA in the Master Node
BlackPearl NAS solution 2U Master Node
Press down on the two release latches and slide the cover toward the rear of the chassis to
remove it.
Figure 10
Release latches on the BlackPearl NAS solution 2U
master node.
2.
Set the cover aside.
3.
Locate the slot where you want to install an HBA in the chassis.
BlackPearl NAS solution 4U Master Node
Note:
The BlackPearl NAS solution 4U master nodes ship with a 10 GigE HBA installed
in slot 1.
Figure 11
HBA locations in the BlackPearl NAS solution 4U
master node.
January 2022
Installation Guide-Spectra BlackPearl NAS Solution
- 30 -