Speco N64NR, Руководство пользователя, Страница: 92 / 114

Device Management
NVR User Manual
To use this function, the NVR shall be connected to a switch supporting 802.1x protocol. The switch can be considered
as an authentication system to identify the device in a local network. If the NVR connected to the network interface of
the switch has passed the authentication of the switch, it can be accessed via the local network.
Protocol type and EAPOL version: Please use the default settings.
User name and password: The user name and password must be the same with the user name and password applied
for and registered in the authentication server.
11.1.8 NAT Configuration
Click Start

Settings

Network

NAT to go to the interface for NAT configuration and check “Enable”. Click “Apply” to
save the settings and make note of the QR code number under the QR code. Via Internet Explorer, go to
connect.specotech.cloud, input the QR code number, your username and password to login.
You can also scan the QRCode through mobile client which is installed in the mobile phone or PAD to log in the mobile
client instantly.
11.1.9 View Network Status
Click Start  Settings  Network  Network Status to view the network status or click on the tool bar at the bottom
of the live view interface to view network status conveniently.
11.2 Basic Configuration
11.2.1 General Configuration
Click Start

Settings

System

Basic

General Settings to go to the following interface. Set the device name, device
No., language, video format and main output. Enable or disable wizard, “Log In Automatically”, “Log Out
Automatically” (if checked, you can set the wait time), “App Live Self-Adaption” and “Dwell Automatically” (if checked,
you can set the wait time). Click “Apply” to save the settings.
85