Speco N64NR, Руководство пользователя, Страница: 35 / 114

Live View
Introduction
NVR User Manual
5.3.2 Image Settings
Click Start  Settings  Camera  Image  Image Settings to go to the following interface. Select the camera and then
set the brightness, contrast, saturation and hue of the camera. Click “Advanced” button or in the camera list on
the right side of the interface to pop up “Image Adjust” interface and then set the relevant setting items. Please refer
to
5. 4.5 Image Adjustment for detailed introductions of these items.
You can click “Default” to restore the image settings to the default factory settings.
5.3.3 Mask Settings
Some areas of the image can be masked for privacy. Up to four mask areas can be set for each camera. Click
Start
 Settings  Camera  Image  Mask Settings to go to the interface as shown below. Select the camera and enable
the mask. Click “Draw” button and then drag the mouse on the image area to set the mask area; click “Delete” button
to delete the mask areas; click “Apply” to save the settings.
28